Loading... Please wait...
  • Image 1

Floor Varnish Hard Wearing Dead Flat

$0.00
Quantity:

Product Description

ultra tough, crystal clear protection for interior surfaces that dries fast and cures fast
 
An ultra hard, high quality coating with a satin finish that dries to a crystal clear film with extremely good sanding properties allowing a very high quality of finish to be obtained. Formulated for working surfaces and areas of high wear. 
When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Heavy Duty Wood Varnish Satin Finish followed by one or two coats of Hard Wearing Wood Varnish Dead Flat Finish.

ideal for
• hardwood and softwood • doors • kitchen worktops • bar tops • tabletops • counters • bookshelves • kitchen cabinets • wood panelling

unique qualities
• dries fast cures fast • highly heat and water resistant • ultra hard • very clear • good resistance to alcohol, stains and chemicals • sands to a high-grade finish • easy to apply • wash brushes in water

preparation
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils/resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.

application
Ensure the product is well mixed. Apply 3 thin coats of varnish and brush out well. Too thick a coating, or pooling in crevices, will dry with a white haze. 
On new wood and porous surfaces dilute the first coat 10% with water. Lightly sand wood in between applications to remove any raising of the grain that may have occurred. 
When using dead flat finish, if a very high level of durability and stain resistance is required, apply one or two coats of Heavy Duty Wood Varnish Satin Finish followed by one or two coats of Hard Wearing Wood Varnish Dead Flat Finish.

caution
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats. Do not apply over uncured oil based paint.

drying time: 30-60 minutes
 
recoat time: 1-2 hours
 
curing time: 16 hours
 
coverage: 10-20 square metres per litre (107-215 square feet)
 
Technical Data Sheet

  


Find Similar Products by Category